Mosvo Electronics Technology Co., Ltd.

Features：1. Power supply range: 24-58VDC2. Maximum continuous current 50A, maximum peak current 100A3. Working modes: torque mode, speed mode, position mode4. Space vector operation, sine wave control (DC brushless servo motor)5. Control ports: RS232, CAN, Pulses/DIR, CU/CD dual pulse, Quad A/B orthogonal pulse, PWM, PWM/DIR, ± 10V differential analog voltage, single ended analog voltage (potentiometer), 0~+10V,+10V/DIR, ENABLE/DIR/LEFT/RIGHT (4 fixed functions can be configured), FAILT, IO1~4 (4 configurable inputs/outputs)6. Feedback components: incremental encoder, Hall sensor7. Hardware and software limit function, automatic zero position search; Built in braking resistor8. Can be controlled through CAN bus networking9. Implement PC control, parameter adjustment, and online testing through RS232 or CAN10. Overcurrent, overvoltage, undervoltage protection, IIT current limit, speed loss control, temperature protection, dynamic tracking error over limit protection11. Suitable for DC brushless servo motors

Features:1. Power supply range: 12-48VDC2. Maximum continuous current 2A, maximum peak current 6A3. Space vector operation, sine wave control4. Suitable for DC brushless servo motors5. Function: Enable, Direction, Error Output6. Feedback components: incremental encoder, Hall sensor7. Control methods: position control, speed control, torque control8. Protection type: overcurrent protection, overvoltage protection, undervoltage protection, speed loss control, IIT current limit9. Control ports: RS232, CAN, Pulses/DIR, PWM, analog voltage, PWM/DIR,+10V/DIR, CU/CD dual pulse, QuadA/B10. Hardware limit function, software limit function, automatic zero position search upon startup11. Environmental temperature range: Civil grade -10~70 ℃, Industrial grade -40~85 ℃12. Installation size: 65x47x23cm

1. Operating Modes:Torque Mode,Speed Mode,Position Mode;2. Feedback Elements:Incremental encoder, Hall sensor, resolver;3. Control Ports:Digital command RS232,CAN,Pulse1/CU (high-speed input,pulse or CU (forward pulse) input), Pulse2/CD/DIR (high-speed input, direction or CD (reverse pulse) input),ENABLE/DIR/LEFT/RIGHT (4 fixed-function programmable inputs),FAULT (1 fixed-function programmable output),IO1~4 (4 programmable inputs/outputs),±10V analog voltage,single-ended analog voltage (potentiometer);4. Network control via CAN bus;5. Suitable for driving brushless DC servo motors6. Space vector operation, sine wave control (brushless DC servo motors);7. Motor brake control;8. Automatic zeroing function;9. Hardware and software limit functions;10. IIT current limit;11. Temperature protection;12. Overvoltage and undervoltage protection;13. Rapid runaway protection;14. Tracking over-limit protection.

Features:• For brushed motor;• Working modes: amplifier mode, velocity mode, position mode and torque mode;• Feedback element: incremental encoder;`• Command Interfaces: RS232, RS485, CAN, ±10V analog voltage;• EN port: the high-level is for motor release and the low level is for motor loading;• BRAKE port: the high-level is for emergency stop and the low level is for normal;• RESET port: the high-level is for fault clear (invalid during normal operation);• FAULT port: the high-level is for fault output (no external pull-up resistor required);• Aout, Bout port: for encoder A, B signals output (no external pull-up resistor required);• RES-RES port: for external braking resistor (≥ 10Ω, ≥ 100W);• Photoelectric isolation for power supplies: between internal drive power supply and control powersupply;• Photoelectric isolation for external input control signal;• External brake signal input;• Automatic zero finding;• Limit function: left and right;• PC control, parameter adjustment and online testing;• Internal temperature monitoring to the driver.

Features:1. Step-mode control via input pulse and direction signals;2. High-precision PWM signal speed control;3. Parameter adjustment and online monitoring via RS232;4. Digital storage of PID parameters;5. Real-time reading of drive internal temperatureOvercurrent,overload,overvoltage and undervoltage protection;6. Temperature protection;7. Dynamic tracking error protection.